Jikra

Forgot password?

New to Jikra?

Already have an account?

By continuing, I agree to Jikra's T&C, Privacy Policy

Skip to main content
Extra 10% Off at Checkout | Free Shipping | 7-Day Easy Returns

No results found

Car & FASTag · 5 min read · Nov 17, 2026 · 23 views

Transparent FASTag Holder: How to Install and Use It Right

How to fit a transparent FASTag holder on the windshield step by step, how to slide the tag in and out, and the do's and don'ts that keep your tag from counting as a loose FASTag.

Video · 0:18

FASTag Holder for Car: How the Clear FASTag Cover Fits on the Windshield

An 18-second video of the JIKRA FASTag holder for car, a transparent FASTag cover with an adhesive strip on the back. It shows the clear holders as they come packed, a FASTag card going into the holder, the backing being peeled off the adhesive strip, and the holder fixed on the inside of the windshield with the tag showing through the clear front.

  • 0:00 Clear FASTag holders, as they come packed
  • 0:05 FASTag card going into the holder
  • 0:07 Peeling the adhesive strip
  • 0:09 Holder fixed inside the windshield
  • 0:13 Where to order
Open the video page Watch on Instagram

By the Jikra team. JIKRA sells the transparent FASTag holder shown here. AI helped us draft this guide; the steps follow the holder's design and the photos are our product photos. FASTag rules are linked from the official sources.

Quick answer: a transparent FASTag holder is a clear plastic sleeve with adhesive on the back. Clean the inside of the windshield at the top centre behind the mirror, peel the backing, press the holder on edges first, let it set, then slide your FASTag in through the open side. No tools are needed. Keep it stuck and keep the tag inside it while you drive; a tag that is loose in the car can be charged double toll.

FASTag sliding into a clear FASTag holder, with the holder fixed behind a car's rear-view mirror
The JIKRA transparent holder: the tag slides into the clear sleeve, and the holder sits behind the rear-view mirror.
Watch: the JIKRA transparent FASTag holder, from the pack to the windshield, with a FASTag inside. See the FASTag holder for car · Watch on Instagram

What a transparent FASTag holder is

It is a clear plastic shield shaped like a card sleeve. One face has an adhesive strip that sticks to the glass; the other is open on one side with a thumb cut-out, so a FASTag slides in and out. Because the plastic is clear and has no metal, the toll reader's radio signal passes through it (more in does FASTag work through plastic).

Use it for a tag that has not been pasted yet. FASTags are made to be destroyed if peeled off the glass, so a tag already pasted on your windshield can't be moved into a holder. If yours is pasted and works, leave it.

How do I install a FASTag holder on car glass?

  1. Pick the spot: inside the front windshield, top centre, just behind the rear-view mirror. On cars with a camera or rain sensor housing there, go just beside it, towards the passenger side. See where to fix a FASTag.
  2. Clean the glass: wipe the spot with a dry microfibre cloth, then with a little glass cleaner or isopropyl alcohol, and let it dry fully. Dust and oil are the main reasons adhesive lets go.
  3. Check the direction: the open side with the thumb cut-out should face where your hand can reach, usually down or sideways.
  4. Peel and press: peel the backing off the adhesive strip, hold the holder by its edges and press it onto the glass, edges first, for about 30 seconds.
  5. Let it set: wait a few hours before sliding the tag in or driving on rough roads, so the adhesive bonds. Avoid fitting it on a very cold or very hot glass.
  6. Slide the tag in with the printed side facing out, so the tag number stays readable from outside.

Can I install a windshield FASTag holder myself?

Yes. It takes about five minutes and needs no fitting skill. The only things that go wrong are a dusty windshield and a crooked first press, so clean well and line it up before the adhesive touches the glass.

Do I need tools to install a FASTag holder?

No tools. A clean cloth and some glass cleaner or isopropyl alcohol help the adhesive stick.

How do I insert my FASTag into a transparent sleeve?

FASTag card held inside a clear FASTag holder
The tag sits flat inside the clear sleeve, printed side out.

Keep the tag's original backing paper on, so it doesn't stick to the inside of the sleeve. Push it in through the open side, using the thumb cut-out, until it sits flat with no bend. Never fold or crease a FASTag: the antenna is printed inside it.

Can I remove the FASTag from the sleeve without damaging it?

Yes, if the tag was never pasted. A tag with its backing still on slides out through the cut-out. Do it only when needed, for example to read the tag number or when your bank sends a replacement, and put it straight back. Driving with the tag out of the holder is the "loose FASTag" the rules penalise.

Can a FASTag holder be repositioned after installation?

Not well. Most adhesive strips are made to stick once. If you peel the holder off, clean the old adhesive off the glass and use fresh double-sided automotive tape or a new holder. Getting the position right the first time is easier.

How should I clean my FASTag holder?

Wipe the outside with a dry or slightly damp microfibre cloth. Avoid strong solvents and ammonia cleaners on the plastic and near the adhesive edge, and don't soak the holder when you clean the windshield.

What accessory can keep my FASTag securely positioned?

A holder fixed to the glass at the standard spot keeps an unpasted tag in one place. The other secure option is the standard one: paste the tag itself on the windshield.

Do's and don'ts

  • Do keep the holder stuck and the tag inside it every time you drive.
  • Do use it only in the vehicle the tag was issued for.
  • Don't keep the tag or the holder on the dashboard or in a pocket.
  • Don't put the holder behind a metallic sun film or a sticker.
  • Don't peel a pasted tag off the glass to move it into a holder.

Rules and what they mean for holders: is a FASTag holder legal in India?

FASTag holder ko windshield par kaise lagate hain?

Sheesha saaf aur sookha karein, mirror ke peeche upar beech mein jagah chunein, holder ki tape ki paper hatakar kinaron se dabakar chipkayein, kuch ghante set hone dein, phir FASTag ko khule side se andar sarka dein. Hindi guide: FASTag kya hai.

Related guides

Share:
Tags: fastag holder transparent fastag holder installation
Back to Blog

In Stock Out of Stock

Shopping Bag

Your bag is empty

Add items to get started

You May Also Like

🎁

Add ₹ more for a FREE Cap!

Free gift on orders above ₹.

Subtotal

Extra 10% off at checkout

Pay . Tap Apply on the next screen.

Shipping and taxes calculated at checkout

View Bag
🎁

✨ Shop More, Get More! FREE Cap on ₹999+ & FREE Facial Kit on ₹1,699+. Shop Now!

Add Jikra to Home Screen

Chat with Jikra

Typically replies instantly

Start Chat