Jikra

Forgot password?

New to Jikra?

Already have an account?

By continuing, I agree to Jikra's T&C, Privacy Policy

Skip to main content
Extra 10% Off at Checkout | Free Shipping | 7-Day Easy Returns

No results found

Car & FASTag · 4 min read · Nov 17, 2026 · 23 views

Does a FASTag Work Through a Plastic Cover? RFID Explained

How toll readers read a FASTag, why clear plastic doesn't block it but metal does, FASTag size, and why holders work with every bank's tag.

Video · 0:18

FASTag Holder for Car: How the Clear FASTag Cover Fits on the Windshield

An 18-second video of the JIKRA FASTag holder for car, a transparent FASTag cover with an adhesive strip on the back. It shows the clear holders as they come packed, a FASTag card going into the holder, the backing being peeled off the adhesive strip, and the holder fixed on the inside of the windshield with the tag showing through the clear front.

  • 0:00 Clear FASTag holders, as they come packed
  • 0:05 FASTag card going into the holder
  • 0:07 Peeling the adhesive strip
  • 0:09 Holder fixed inside the windshield
  • 0:13 Where to order
Open the video page Watch on Instagram

By the Jikra team. JIKRA sells a transparent FASTag holder, linked here. AI helped us draft this guide; the technical facts come from IHMCL's published FASTag specification, checked on 17 November 2026.

Quick answer: yes, a toll reader can read a FASTag through thin clear plastic. FASTag is a passive UHF RFID tag (860–960 MHz, EPC Gen 2), and plain plastic lets those radio waves through, just as windshield glass does. What blocks the signal is metal: metallic sun films, foil, metal-printed covers or a tag hidden behind a sensor housing. Every bank's FASTag uses the same standard, so a clear holder works the same with ICICI, HDFC, SBI, IDFC FIRST or any other issuer. Whether a holder is accepted under the fixing rules is a separate question, covered in is a FASTag holder legal?

FASTag card inside a clear plastic FASTag holder
A FASTag inside a clear plastic sleeve: plastic doesn't stop the radio signal.
Watch: the JIKRA transparent FASTag holder, from the pack to the windshield, with a FASTag inside. See the FASTag holder for car · Watch on Instagram

How a toll reader reads your FASTag

IHMCL's specification describes the tag as passive: it has no battery. The reader above the lane sends a radio signal in the UHF band (860–960 MHz under EPC Gen 2 / ISO 18000-6C); the tag's printed antenna picks it up, powers the chip, and replies with the tag ID. The reader is mounted to read tags fixed inside windshields from several metres away.

  • Glass, plastic, paper: let UHF signals through with little loss.
  • Metal and metallic films: reflect or absorb them. A tag behind metal can fail to read.
  • Water and the human body: absorb UHF, which is why holding a tag in your hand reads poorly, as well as breaking the rules.

Will FASTag scan properly through a transparent plastic holder?

Yes, when the holder is plain clear plastic, stuck at the standard spot inside the windshield, and the tag sits flat inside it. The same applies to a tag inside any plastic card sleeve (question 35 in our list): plastic is not the problem, position and metal are.

Does a FASTag cover interfere with RFID signals?

A plain plastic cover doesn't. A cover with metallic printing, a foil layer or a metal frame can. If a cover looks shiny or mirrored, don't put it in front of a tag.

Can an adhesive FASTag holder cause scanning failure?

The adhesive doesn't block the signal. Failures come from the holder being fixed in the wrong place (low on the glass, behind a sensor housing or a metallic tint band), the tag being bent inside it, or the holder falling off so the tag is no longer at the windshield. See why FASTag is not detected.

Do FASTag holders work at all Indian toll plazas?

The radio side works the same at every FASTag lane, because all readers and tags follow one national standard. The rules side is the same everywhere too: the tag must be on the windshield of its own vehicle. A toll operator can report a tag they consider improperly fixed (details).

What type of plastic holder is suitable for RFID FASTags?

Thin, clear, non-metallic plastic with no metallic ink or foil, that holds the tag flat. Avoid thick colourful cases, mirrored finishes and anything with a metal clip in front of the tag.

Does a FASTag holder work with ICICI, HDFC, SBI and IDFC FASTags?

Yes. FASTags from every issuer bank are built to the same IHMCL specification and read by the same toll readers. Bank logos and colours differ; the tag inside doesn't. The same goes for Airtel Payments Bank, Kotak, Axis and other issuers (question 38 in our list).

FASTag size: will it fit a holder?

IHMCL sets a maximum, not one fixed size: a FASTag including its backing may occupy at most 50 sq cm of windshield. Tags from different issuers are close to a card shape within that limit. A holder made for FASTags takes them without bending; never trim or fold a tag to fit, because the antenna runs through it.

FASTag holder mein toll par scan hoga kya?

Haan, saaf plastic ke andar se FASTag scan ho jata hai, kyunki toll reader radio signal se padhta hai aur plastic use nahi rokta. Metal wali film ya foil signal rok sakti hai. Holder sheeshe par sahi jagah chipka hona chahiye. Hindi guide.

Sources

  • IHMCL, RFID tag specification (passive, UHF 860–960 MHz, EPC Gen 2 / ISO 18000-6C, max 50 sq cm, tamper-proof): ihmcl.co.in

Related guides

Share:
Tags: fastag rfid fastag holder
Back to Blog

In Stock Out of Stock

Shopping Bag

Your bag is empty

Add items to get started

You May Also Like

🎁

Add ₹ more for a FREE Cap!

Free gift on orders above ₹.

Subtotal

Extra 10% off at checkout

Pay . Tap Apply on the next screen.

Shipping and taxes calculated at checkout

View Bag
🎁

✨ Shop More, Get More! FREE Cap on ₹999+ & FREE Facial Kit on ₹1,699+. Shop Now!

Add Jikra to Home Screen

Chat with Jikra

Typically replies instantly

Start Chat