FASTag for a New Car: Getting It, Fixing It, First Toll
How to get a FASTag for a new car, where to stick it on cars with ADAS or rain sensors, the end of KYV for new car tags, and whether you need a holder.
In this guide
Video · 0:18
FASTag Holder for Car: How the Clear FASTag Cover Fits on the Windshield
An 18-second video of the JIKRA FASTag holder for car, a transparent FASTag cover with an adhesive strip on the back. It shows the clear holders as they come packed, a FASTag card going into the holder, the backing being peeled off the adhesive strip, and the holder fixed on the inside of the windshield with the tag showing through the clear front.
- 0:00 Clear FASTag holders, as they come packed
- 0:05 FASTag card going into the holder
- 0:07 Peeling the adhesive strip
- 0:09 Holder fixed inside the windshield
- 0:13 Where to order
By the Jikra team. JIKRA sells a FASTag holder, linked in this guide. AI helped us draft it; rules are from NHAI and IHMCL sources linked at the end, checked on 17 November 2026.
Quick answer: most new cars come with a FASTag from the dealer, issued by a bank and linked to your registration. If yours didn't, get one from any issuer bank or an authorised seller with your registration certificate. Since 1 February 2026, new car FASTags need no separate KYV: the bank verifies before activation. Paste it inside the windshield at the top centre, beside the camera or rain-sensor housing if your car has one, recharge, and you are ready for the first toll.
Which FASTag holder or setup should I choose for my new car?
For a new car the simplest and fully standard choice is to paste the FASTag directly at the top centre of the windshield, inside. If you want the tag covered or slidable instead, a clear adhesive holder stuck at the same spot is the alternative, but it isn't the standard method; read holder vs sticker and the rules on holders first.
Should I buy a FASTag holder for a brand-new car?
Only if the tag hasn't been pasted yet and you want it in a holder. Many dealers paste the tag at delivery; if yours is pasted and reads fine, leave it, because peeling it off destroys it. A new windshield is the best moment to decide, before the tag touches the glass.
How can I keep my new car's windshield free of sticker residue?
- Put the tag in the right spot the first time, so it never has to move.
- Don't add other stickers around it: they leave glue and can block the reader.
- When a tag must come off one day, warm the glass and use isopropyl alcohol: avoid glue marks.
Where to stick FASTag on a new car with ADAS or rain sensors
Many newer cars have a camera, rain or light sensor housing behind the rear-view mirror, exactly where FASTags usually go. Don't cover the housing or its viewing area. Put the tag on clear glass just beside it, usually towards the passenger side, still near the top. Avoid the dotted black band at the very top edge of the glass. More: where to stick FASTag.
Getting a FASTag for a new car: steps
- Ask your dealer whether a FASTag was issued with the car; most are.
- If not, apply with an issuer bank (app, branch or authorised point) using your registration certificate.
- Since February 2026, KYV for new car tags is not required; the bank checks the vehicle before activating the tag. Tags sold online are activated only after the bank validates them.
- Paste it, recharge, and test it at the first toll.
First highway trip checklist
- Balance enough for the whole route, recharged before you leave.
- Tag fixed inside the windshield, flat and clean.
- Bank app installed, with SMS alerts on.
- If you'll cross NH plazas often, check the annual pass.
Nayi car ke liye FASTag holder lena chahiye kya?
Agar FASTag pehle se sheeshe par chipka hai aur toll par chal raha hai, to holder ki zaroorat nahi. Naya tag abhi chipka nahi hai aur aap use cover mein rakhna chahte hain, tabhi holder lein, aur use sheeshe par hamesha chipka rehne dein. Hindi guide.
Sources
- NHAI press release, 1 Jan 2026 (KYV discontinued for new car FASTags): nhai.gov.in
- IHMCL RFID tag specification: ihmcl.co.in