Neckband vs Earbuds: Which Wireless Earphones Should You Buy?
Neckband or true wireless earbuds? Here is how the two types differ in daily use, and five quick questions that help you pick the right one.
In this guide
Choose a neckband if you want earbuds that are hard to lose, buttons on the band and no charging case to carry. Choose true wireless (TWS) earbuds if you want the smallest, lightest pair and do not mind keeping track of a case.
Both types connect to your phone over Bluetooth, and both can sound good. The real differences are in how you wear them, how you charge them and how easily you can lose one. Here is how they compare in daily use, and a quick way to decide.
What is the difference between a neckband and earbuds?
A neckband has a band that rests around the back of your neck. The band holds the battery and the buttons, and an earbud hangs from each end on a short cable. When you take the earbuds out of your ears, they stay on the band, on your chest.
True wireless earbuds, often called TWS (true wireless stereo), are two separate earbuds with no wire between them or to your phone. Each earbud has its own small battery, chip and speaker, and you put them back in a charging case to recharge them.
There is a third, older style too: cable-style wireless earphones, where a thin cable joins the two earbuds and runs behind your neck, with the buttons on the cable. There is no band and no case.
Neckband vs earbuds at a glance
| Neckband | True wireless earbuds (TWS) | |
|---|---|---|
| How you wear it | Band around the neck, earbuds on short cables | Two separate earbuds, nothing around the neck |
| What you carry | Just the neckband | Earbuds plus a charging case |
| Losing an earbud | Hard: both earbuds are tied to the band | Easier: a single earbud can fall and roll away |
| Buttons | On the band, easy to find by touch | Touch or buttons on the earbuds themselves |
| Charging | Charge one device | Charge the case; the case charges the earbuds |
| Taking them out often | Easy: let them hang on the band | You need a pocket or the case for them |
| Using one earbud | Leave the other one hanging | Many models allow one earbud at a time |
| Size in your pocket | Bigger: the band does not fold small | Smallest: the case fits in a pocket |
When a neckband is the better choice
- You take your earphones out a lot. At work, in a shop or in class, you can pull the earbuds out and let them hang, then put them back in seconds later.
- You travel in crowded buses, trains or the metro. If an earbud slips out, it hangs on its cable instead of falling to the floor.
- You do not want to carry anything extra. There is no case to forget at home or to keep charged.
- You like real buttons. Buttons on the band are easy to find without looking at the phone.
- You tend to lose small things. A neckband is one piece, so there is no single earbud to misplace.
When earbuds (TWS) are the better choice
- You want the smallest pair. The earbuds and case fit in a shirt or jeans pocket.
- You do not want anything on your neck, for example in hot weather or under a collar or a scarf.
- You often listen with one ear. Many TWS models let you use either earbud on its own while the other one charges.
- You lie down while listening. There is no band pressing on the back of your neck.
What about cable-style wireless earphones?
Cable-style wireless earphones sit between the two. A thin cable joins the earbuds and runs behind your neck, so the earbuds cannot be lost separately, but there is no band to carry. The buttons sit on the cable. The JIKRA magnetic Bluetooth earphones are this type, with a three-button remote on the cable, and come with a single-ear Bluetooth earpiece.
How to choose: 5 quick questions
- Do you take your earphones in and out many times a day? If yes, a neckband is easier.
- Will you remember to carry and charge a case? If not, pick a neckband or cable-style earphones.
- Is pocket size the most important thing? If yes, pick TWS earbuds.
- Do you make a lot of calls? Check that the model you pick has a built-in mic. Both types can have one, but not every model does.
- How long do you listen in one go? Compare the playback time printed on the box or in the listing. For TWS earbuds, check two figures: time in the earbuds alone, and total time with the case.
How to pair a neckband or earbuds with your phone
- Charge the neckband or the earbud case fully before first use.
- Switch the neckband on, or open the earbud case, as the manual says.
- On your phone, open Settings, then Bluetooth, turn Bluetooth on and tap Pair new device.
- Tap the earphones' name when it appears in the list.
- If the phone asks for a code, check the manual. Many accessories use a simple code such as 0000.
After the first pairing, the phone and the earphones can usually connect on their own when both are on and Bluetooth is switched on. If they do not, tap the earphones' name in the Bluetooth list again.
Listen safely with any wireless earphones
- Keep the volume down. The World Health Organization suggests keeping your device at no more than 60% of its maximum volume.
- Give your ears regular breaks from loud sound.
- Pick ear tips that fit well. A good seal blocks outside noise, so you do not need to turn the volume up.
- Take one earbud out when you walk or cycle near traffic, and do not wear earphones while driving.
Care tips for both types
- Wipe the earbuds and the band or case with a dry cloth after use, and let them dry before you put them away.
- Clean the ear tips gently. Dirty tips sit badly and can muffle the sound.
- Do not wind neckband or earbud cables tightly, and do not bend the band sharply.
- Keep earphones away from water unless the product clearly says it is water-resistant.
- Store them in a bag pocket or drawer where they will not be crushed.
Our pick if you choose a neckband
The JIKRA neckband earphones are a wireless Bluetooth neckband with in-ear earbuds on short cables and three buttons on one arm of the band. They come in red and black or blue and black. See more electronics and gadgets at Jikra.
FAQs
Which is better, a neckband or earbuds?
Neither is better for everyone. A neckband suits people who take their earphones out often, travel in crowds or do not want to carry a case. TWS earbuds suit people who want the smallest pair and nothing around the neck.
What is TWS?
TWS stands for true wireless stereo. It means the two earbuds have no wire between them or to the phone. Each earbud has its own battery and recharges in a charging case.
Is a neckband good for calls?
It can be, if it has a built-in mic. Not every neckband has one, so check the listing or the box for a mic before you buy one for calls.
Neckband or earbuds for the gym?
A neckband keeps the earbuds on the band if one slips out during a workout. TWS earbuds leave nothing on your neck but can fall out and roll away. Whichever you pick, wipe them dry after exercise, and use them near water or sweat only if the product says it is water-resistant.
Which lasts longer on one charge?
It depends on the model, so compare the playback time printed on the box or in the listing. For TWS earbuds, look at both figures: the earbuds alone and the total with the case.
Is a neckband heavy to wear?
It weighs more than a pair of earbuds, because the band carries the battery and the buttons. The weight rests on the back of your neck, not in your ears.
Can I use only one earbud?
With a neckband, take one earbud out and let it hang. Many TWS earbuds also let you use either earbud on its own.
Do neckbands and earbuds work with laptops?
Yes, if the laptop has Bluetooth. Pair them from the laptop's Bluetooth settings the same way you would on a phone.